Magpowr Spyder Plus
The Magpowr Spyder Plus Web Tension Control is a cost effective way to get precise tension control. The Spyder is designed for many types of tension control applications including closed-loop, open-loop, unwind, rewind, point-to-point or dancer. Its small design allows you to put it in compact places where room is a factor. The Magpowr Spyder Plus is built with an Ethernet connection, so the operator can view it form a web browser.
Torpey Denver can assist you with any Magpowr Spyder Plus questions. We can also help you maintain and setup this unit if needed. Call or Email us today!
Spyders Plus Key Features
- Powerful tension control at an affordable price used to control clutches and brakes, or interface directly with a drive
- Troubleshooting and parameter access via a web browser
- Share data remotely with a PLC or remote PC via Ethernet with Modbus/TCP
- Advanced features for Dancer applications including Dancer Mode and Remote Setpoint Adjustment
- Adjustable taper tension
- User-friendly keypad and display
- Versatile control for unwind, rewind, point-to-point or dancer applications
- Compatible with any 3rd party ultrasonic or laser sensor (0 to 10 Vdc signal required)
- Tension control at an affordable price
- Control clutches and brakes, or interface directly with a drive
- Connected to web browser for trobleshooting
- Easy to use keypad and display
- UL and CE approved
Specifications
Supply Voltage: 24 VDC, ±10%, 250 mA, 6 VA
Enclosure: IP-20 (IEC529)
Temperature Range:
Operating: – 0˚ C to 50˚ C
Storage: -30˚ C to +80˚ C
Inputs (from load cell or dancer position):
Load cell: 2.1 mV/V using +5 VDC and -5 VDC across one 350 ohm sensor or two 350 ohm sensors in parallel
Tension Setpoint, Manual Setpoint: 0 VDC to +10 VDC, 0.25 mADC maximum, or 1k to 10k ohm potentiometer
E-Stop, Run/Stop, Tension Off, Auto/Manual: switch closure or 5 VDC or 24 VDC active high/low logic, 8 mADC maximum
Dancer Position: 1k to 10k ohm potentiometer or a 0 to 5 VDC signal
Outputs:
Torque (Main Output):
0 to +10 vdc, 1 mADC maximum
4 to 20 mADC, 500 ohm maximum
-10 to +10 vdc, 1 mADC maximum
Tension meter: 0 to 1 mADC or 0 to +10 VDC analog
Communications: Ethernet, Modbus TCP, FTP Client, HTTP Web Server Interface
Web Browser File Format: html
Ultrasonic or Laser Sensor for Diameter Input: 0 to 10 vdc signal